The lifting and rigging means can be fixed, mobile, on legs or assembled on the structure of a building or roof, provisory or not. Their purpose is to hold the lighting equipment, sound systems, scenery, curtains or machinery equipments.

Our engineers will study your project knowing perfectly the dimensional requirements as well as sound issues. They will be aware of the risk due to the rigging or the lifting of the load on theatre, show, etc..

Winch for captive balloon

Presentation

A solution based on an electric haulage winch with the patented Dynamic Power Optimization (DPO) system allows a variator to adapt the speed of the winch to the required effort at all times, a rotary collector for the power supply to the balloon and the optical fibre, a manual emergency control for handling the balloon even without electricity.

Technical characteristics

Maximum brake retaining force : 1,800 daN (on the first layer). Fitted with 180 m of textile rope, upper and lower limit safety switch, an electrical unit including "Voltage present” and “Emergency stop” light on the box, variable speed drive using variable frequency, braking resistance...

Mobile lifting winch for the installation of equipment used in the event industry (projectors, ramps ...).

Presentation

The specificity of this winch is based on a monitoring of the load by the inverter allowing to automatically switch to high speed when the winch is empty. Radio control with two piloting positions.

Technical characteristics

Maximum lifting capacity: 200 kg, speed: 32 m / min with load and 48 m / min with no load (automatic switch to high speed when the load is very low), equipped with 160 m of wire rope, control: pendant control or dual control remote control (Dual transmitter with pick and catch option), power: 230 V single phase (domestic plug).

Motorized show panels

Presentation

Motor reducer to rotate lighting panels used during concerts.

Theatre winch

Presentation

Silent electric winch used to lift and lower curtains in theatre, gymnasium...

Technical characteristics

Capacity of 60 kg, lifting speed: 15 m/mn. Power: 230 V single phase, capacity: 2 x 20 m of wire rope Ø 3 mm. Tensioning of the wire rope by gravity (parallelogram system). Reducer by worm gear sealed in oil bath. Clutch/declutch by system of friction. Integrated forward and reverse limit switch.